Skip to content

BUSMASTER 3.2.2.46: transmit patterns and LIN ID scanning

BUSMASTER 3.2.2.46 adds CAN/LIN transmit patterns, send-count control and LIN master-read ID scanning. Common value sweeps, random-payload tests and node-response checks can be configured directly in the desktop application.

Combine changing data with a fixed number of sends

Section titled “Combine changing data with a fixed number of sends”

Message IDs and payload fields can increment or vary randomly, separately or together. Bit fields support ranges, steps and byte-order settings. Patterns, send count and the repeat interval remain independent controls.

For example, select an incrementing ID and payload, set the send count to ten, and enable cyclic transmission. The task stops after the requested number of sends.

Transmit patterns, send count and parameters in the CAN transmit window

Run master-read requests across a selected ID range. Results distinguish responses, missing responses and errors. Selected results can be added to the transmit window for further inspection and testing.

LIN master-read ID scan results

The release also improves state preservation while editing cyclic messages, recovery from transmit errors, and A2L import diagnostics.

Read the illustrated transmit-pattern and send-count guide

Last updated: