Skip to content
BUSMUST
中文Support

LIN Controller Configuration

Introduction:

BUSMASTER Can be connected to LIN physical channel using LIN Controller.

Currently BUSMASTER Supports the following LIN Controllers.

ETAS BOA (To monitor messages LDF file needs to be associated) ETAS ISOLAR-EVE PEAK USB BUSMUST USB-LIN Vector XL Kvaser LIN

Selecting Controller:

To select controller use LIN->Driver Selection->{Driver} For example to select ETAS ISOLAR EVE Driver use LIN->Driver Selection->ETAS ISOLAR-EVE.

For BUSMUST LIN devices, select the BUSMUST LIN driver from LIN->Driver Selection, then map the detected hardware channel to the BUSMASTER logical channel.

BUSMUST LIN configuration includes channel selection, bit rate, master/slave role, checksum mode, and schedule related settings. For the full BUSMUST LIN workflow, see /docs/busmaster/reference/topics/busmust-lin-device-workflow/.

Once the Controller is configured BUSMASTER Can be connected to LIN network using LIN->Connect Menu.

Authoritative source: BUSMASTER DITA help source LIN_Controller_Config.dita, compiled into BUSMASTER.CHM with the application.