Configuration
BUSMASTER has provision for configuring the following properties Baudrate: By default the tool is configured to operate at 100kbps for classic CAN. This can be changed to any valid classic CAN value between 5 kbps and 1000 kbps. BUSMUST CAN FD devices also provide a separate data phase bit rate for CAN FD operation. Acceptance Filter: To increase the response of the tool at very high messages rate one can set the acceptance filter. The controller filters the messages based on the values set for acceptance code and mask. This filtering is faster than the software filter (App filters). Warning Limit: One can monitor the condition of the network by setting a warning limit value. The user will be notified when either one of the error counter (Tx & Rx) exceeds the warning limit. By default this value is set to 96. The valid range is from 1 to 127. In USB interface setting warning limit is not supported and it is internally set to 96. Message Display: Every Message can be assigned a user defined color and text. The text associated with the message will be displayed in the selected color along with its data in the message display window whenever that message is transmitted or received. By default all the messages received are displayed in black color. Display entries can be configured. This is the number of entries that the display will show. When the messages received exceeds this count Display will scroll to show the latest entries. The display update rate can also be configured. This will be used to refresh the display periodically. App Filters: You can opt to view and log messages of your choice. Message filters provide this facility. Filters can be applied to message display window, filters and / or message log. The filter list is configurable from CAN –> Filter Configuration menu. Message Logging: You can select a file to log all transmitted and received classic CAN or CAN FD messages. The start of logging can also be triggered on reception of specific message name or message ID. You can configure a logging session for different time stamping mode as well as Hex/Decimal format. You can also select to append or overwrite an existing log file. Message Replay: The messages that are logged to a file can be replayed. The replay can be configured by choosing replay type, time delay and replay file name. You can explicitly specify the delay required between messages or between cycles wherever applicable. For CAN FD traffic, use a log format that preserves FD and BRS attributes. Transmit Message: You can configure/define messages that are to be sent on CAN or CAN FD bus. The configured messages can be database messages or undefined messages. Messages can be standard, extended, RTR where applicable, CAN FD, or CAN FD with bit-rate switching according to controller capability. BUSMUST Advanced Features: BUSMUST devices may provide device-side routing, offline logging, offline replay, and offline data management functions from the CAN ribbon. Simulated Systems: Simulated systems can be configured under CAN Bus consisting of multiple nodes, each representing a dll. Multiple user programs can be built as dlls and loaded. The configured simulated systems can be saved and used across sessions.
The entire above-mentioned configuration except message replay is saved across sessions.
Refer the respective sections for more details
Authoritative source: BUSMASTER DITA help source configuration.dita, compiled into BUSMASTER.CHM with the application.