BUSMASTER XCP tutorials
Applies to BUSMASTER 3.2.2.50 (Build 558). Screenshots use the Chinese interface. Follow six tutorials from ECU connection and physical-value reads to continuous DAQ acquisition, calibration readback and data storage.
Learning sequence
Section titled “Learning sequence”- Prepare the environment and configure A2L: Prepare a wired CAN teaching setup, start the simulator, and configure CAN, A2L, CTO/DTO IDs and the DAQ event.
- Configure the workset and physical-value curves: Add EngineSpeed and SpeedLimit, configure physical-value curves, and size the shared graph buffer.
- Read values and acquire continuous DAQ data: Connect an XCP session, distinguish row selection from acquisition selection, and read, acquire and plot values.
- Write, verify and restore a calibration value: Practise the SpeedLimit 305→350→305 calibration sequence, cancel edits, and recover an uncertain write result.
- Export CSV data and save the project: Save graph samples in the correct stop/disconnect order, distinguish CSV data from CFX settings, and reopen the project.
- Troubleshoot connection, acquisition and communication: Use status and diagnostics to resolve missing values, DAQ failures, graph/export issues and session recovery after transmit-task edits.
Practice files
Section titled “Practice files”- Teaching simulator (Windows Win32 ZIP)
- Teaching A2L
- CSV example
- Single-file HTML tutorial (ZIP)
- Complete practice assets (ZIP)
For the teaching simulator, the master and simulator each use an analyzer connected to a real Classical CAN bus. See environment and A2L setup for preparation.
Use the download center for current and archived BUSMASTER releases.