Hardware timestamps
Hardware timestamps preserve stable, traceable timing across channels.
GENERATION 2 · USB CAN FD analyzers
BM-CANFD-X1PRO
Isolated single-channel USB CAN FD analyzer
A generation-2 single-channel analyzer with 2,500 V isolation, a standard DB9 connector, and reliable online CAN/CAN FD debugging.
1 × CAN FDChannels
8 MbpsCAN FD data phase
> 20,000 fpsReceive throughput
> 5,000 fpsTransmit throughput
Programmable termination
Enable or disable 120 Ω termination in software without rewiring the bench.
One software ecosystem
Use the same device with BUSMASTER, BMCLI automation, or the BMAPI SDK.
High-speed frame transmission
CAN FD data rates reach 8 Mbps, with receive throughput above 20,000 fps and transmit throughput above 5,000 fps.
2,500 V isolation
Electrical isolation between USB and the CAN bus reduces risks from ground-potential differences and field interference.
| Protocols | CAN 2.0 / CAN FD (ISO / Bosch) |
|---|---|
| Channels | 1 × CAN/CAN FD |
| Bit rate | 5 kbps to 8 Mbps |
| USB | USB 1.1 Full-Speed 线缆，约 0.5 m |
| Dimensions | 58 × 36 × 17 mm |
| Weight | < 100 g |
| Termination | Programmable 120 Ω per channel |
| Isolation | 2,500 V |
| Operating temperature | -40 to +85 °C |
DIMENSIONS
58 × 36 × 17 mm, excluding terminalsDimensions exclude removable terminals or external cables. Allow working clearance around connectors.
| Pin 2 | CAN-L |
|---|---|
| Pin 7 | CAN-H |
| Pin 3 / 6 | GND |
| Full definition | See the current product datasheet |
THREE-LAYER SOFTWARE ECOSYSTEM
Visual analysis, AI automation, and a standard API share the same hardware capabilities.
Use BUSMASTER for visual analysis, connect AI and automation through BMCLI, or build your own applications with the BMAPI SDK. Tutorials, commands, and API references are available online.
BM-CANFD-X1PROSpecifications, software, and purchasing